San Francisco / Pacific power systems

Tyler Shewbert,
P.E.

Electrical engineer, standards contributor, and technical strategist working where infrastructure, judgment, and practical operations meet.

8+years in power systems

CA · NV · WAlicensed professional engineer

120+technical sessions annually

80+engineering relationships

01

Practice

function first / beauty in precision

Good systems make the difficult feel deliberate.

My work follows the entire chain: design intent, analysis, specification, installation, maintenance, and the decisions made by the people operating the system after turnover.

The focus is mission-critical power, protection strategy, medium-voltage distribution, technical education, and standards language that remains defensible in the field.

02 / professional record

A career built close to the system.

From fabrication and municipal field verification to healthcare design, national-laboratory reliability, and regional application engineering.

012024—present

Northern California & Northern Nevada

Field Application Engineer

Eaton Corporation · Bussmann Division

Technical application engineering, specification development, standards work, and market leadership across critical-power environments.
  • Deliver 120+ technical training sessions annually on NEC updates, selective coordination, SCCR and UL 508A, surge protection, NFPA 70B, medium-voltage fuse selection, and overcurrent protection.
  • Built and maintain technical specification relationships with 80+ consulting engineering firms, OEMs, and end users across data center, healthcare, institutional, industrial, and commercial power systems.
  • Conduct BESS application engineering for DC overcurrent protection and fuse sizing up to 1500 Vdc under NEC Article 706, NFPA 855, UL 9540, and UL 9540A.
  • Support selective-coordination studies and arc-flash analyses for healthcare, emergency, legally required standby, and critical-operations power systems.
  • Advise on conductor sizing, ampacity, wiring methods, raceway fill, protective-device selection, coordination, and equipment ratings.
  • Engage plan reviewers and inspectors on code adoption and enforcement while contributing to IEEE P3710, P3710.1, and P3005.2.
022024

Livermore, California

Electrical Systems Engineer

Lawrence Livermore National Laboratory

Reliability-centered maintenance and renewal planning for campus-scale medium- and low-voltage infrastructure.
  • Expanded the electrical maintenance program using NFPA 70B and NETA MTS.
  • Managed automatic-transfer-switch replacement projects from scope through procurement and installation oversight.
  • Developed prioritization frameworks for aging cable systems, switchgear, transformers, and distribution equipment.
  • Performed power-system studies, cost estimates, and scoping studies for maintenance and infrastructure replacement.
  • Coordinated preventive and predictive maintenance through CCMS software and applicable testing intervals.
  • Troubleshot system deficiencies and developed maintenance optimization processes under DOE and local AHJ requirements.
032018—2023

San Francisco, California

Electrical Engineer

Cammisa and Wipf Consulting Engineers

Design, analysis, permitting, and construction administration for hospitals, laboratories, universities, and theaters.
  • Developed construction documents for power, lighting, signal, and fire-alarm systems.
  • Performed arc-flash, short-circuit, harmonic, load-flow, and selective-coordination studies, including five concurrent studies on a three-month turnaround.
  • Specified healthcare MC cable assemblies for plenum spaces, patient-care areas, and critical branches under NEC Article 517 and HCAI.
  • Served as prime design consultant, managed multi-consultant teams, and developed direct client relationships.
  • Managed RFI and submittal review, closeout, and permitting with HCAI, DSA, and CSFM.
  • Applied NFPA 70, 70E, 70B, 72, 99, 101, and 110 across institutional design work.
042018

San Francisco, California

Student Design Trainee

San Francisco Public Utilities Commission

Municipal design support grounded in existing conditions and accurate field documentation.
  • Updated electrical construction drawings and field-verified single-line diagrams and municipal distribution drawings.
052017—2018

Santa Cruz, California

Electronic Technician

University of California, Santa Cruz

Applied power electronics work spanning simulation, fabrication, controls, and physical testing.
  • Designed, simulated, fabricated, and tested DC-DC converters, inverters, printed circuit boards, and non-ferrous electromagnets.
  • Programmed IGBTs and designed specialized electromagnets and transformers; installed and operated VFDs and motors.

03 / technical influence

Engineering trust, carried into the market.

A specification network built from a standing start, paired with direct territory responsibility and a consulting background in client, team, and project leadership.

$11.2Mfirst full-year territory sales

116%performance against profit plan

21identified specification opportunities

04 / selected work

Infrastructure with consequences.

Explore all 45 projects
01

UCSF · San Francisco

Hospital data center UPS

Replacement and wiring studies for operating healthcare data centers, coordinating new critical-power infrastructure with existing emergency distribution.

critical power · healthcare · active campus
02

UCSF Parnassus

12 kV campus studies

Medium-voltage arc-flash analysis, labeling, and campus utility planning across central infrastructure serving complex clinical and research operations.

medium voltage · arc flash · master planning
03

Lawrence Livermore National Laboratory

ATS replacement program

Scoping, equipment specification, vendor evaluation, procurement, and installation oversight while maintaining emergency and standby availability.

reliability · federal · operating facility

05 / continued practice

Standards, study, and service.

IEEE working groups

  • IEEE P3710 · Guide for Design of Modular Data Centers
  • IEEE P3710.1 · 300–1500 VDC Systems for Data Centers
  • IEEE P3005.2 · Emergency and Standby Power for Industrial and Commercial Applications

Treasurer, IEEE Industry Applications Society local section. Member: IEEE, NFPA, IAEI, ANS, and NASA Lunar Surface Innovation Consortium.

Education

M.S. Engineering Management

UCLA · in progress, expected March 2027

B.S. Electrical Engineering

UC Santa Cruz · Power Engineering · Honors · 2018

A.S. Mathematics

City College of San Francisco · High Honors · 2015

Technical practice

SKM Power*Tools · AutoCAD · Revit · MATLAB · Excel · Multisim · PSCAD · PSIM · PSPICE · Cadence PCB layout · CCMS

Coursework toward Project Management Professional certification requirements.

Community

  • San Francisco Opera · Young Professionals Board, 2021–2023
  • City Youth Now · Young Professionals Board, 2021–2023
  • San Francisco-Marin Food Bank · Young Professionals Council, 2021–present
  • St. Anthony’s Foundation · Volunteer Counselor, 2011–2019
  • Salvation Army · Volunteer Counselor, 2011–present

06 / a parallel practice

Different room.
Same attention to flow.

Thirteen years behind San Francisco bars informs a second practice: observing service, clarifying stations and handoffs, strengthening training, and making excellent hospitality easier to repeat under pressure.

Bar workflow consulting

open channel / inquiries

Complex system?
Start with the flow.

Available for technical collaboration, speaking, standards work, infrastructure strategy, and bar workflow consulting.

tshewbert@gmail.com